Modul paling ringkas dipasar elektronik. Kombinasi output relai universal dan input universal menjadikannya lebih untuk menghemat ruang dan meningkatkan memberikan nilai yang efisien untuk kebutuhan. Ini juga dilengkapi perlindungan kelas industri terhadap panas yang berlebih.
“Simplify control of your smart room with single app controls everything.”
Fitur Produk
Perawatan Mudah untuk Desain Akses di Depan & Belakang
Modul, power supply, dan receiving card dapat diakses dari depan, dengan cepat meningkatkan kecepatan dalam pemeliharaan.
Desain Panel Tipis dan Ringan
Ketebalan panel 85mm dan membuat ruang pemasangan lebih hemat secara signifikan baik dalam pengiriman transportasi maupun pemasangan panel dibandingkan tradisional biasa.
Tampilan Aplikasi
Ini adalah tampilan LED baru dengan prioritas pada kualitas, harga yang kompetitif, dan layanan purna jual terbaik.
Klik pada pitch piksel yang Anda inginkan untuk melihat spesifikasi
Lihat tabel spesifikasi lengkap di brosur produk
- 12x potential-free relay outputs, 10A, inrush current 500A/2ms
- Relay lifetime: 100 000 cycles under maximum load, 2 000 000 cycles under average load
- Maximum total load 20A
- Sensors close to relays monitor their temperature and switch them off in case of emergency
- Output configurations:
- Standalone switched output
- AC blinds motor with internal blocking of both outputs
- PWM output
- 12 universal inputs configurable for:
- NTC temperature inputs with resistance measurement range 100Ohm – 100kOhm +-50Ohm. Measurement deviation on 1km Cat6 cable: -0.3 °C at 25 °C. AREF terminal ensures there is no noise in the temperature measurement.
- Push button inputs
- Reed / status inputs
- Impulse counter inputs, frequency 200Hz per channel, sample rate 400Hz per channel, pulse on time > 2.5 milliseconds
- Analog inputs 0-10V with voltage measurement range 0-26VDC, single-ended type, resolution 12bits, accuracy 0.1% of full scale, input impedance >16kOhm, normal mode rejection 50dB at 60Hz, conversion time 1250 milliseconds
- For analog input 4-20mA it is necessary to connect a 500Ohm resistor and set in Service settings of the input minimum voltage to 2V (screenshot in the gallery)
- Standby energy consumption: 1W
- Energy consumption for one relay closed: 0.4W
- Power dissipation for each 1A of load: 0.16W
- Maximum power dissipation at full load of 20A for all relays closed: 1+0.4×12+0.16×16=8.4W
- Power supply 24VDC +-10%
- Protection: IP20, operating temperature: -20°C to 40°C
- DIN rail, 6 modules. Width 107 mm, height 59 mm
- 220 – 240 VAC LED light dimming
- 4 channels
- Loads:
- Capacitive loads (LED bulbs): Maximum 100VA per channel, maximum 10 LED bulbs per channel
- Resistive loads: Maximum 250W per channel
- Short circuit protection, temperature protection per each channel
- Total load for the whole module max 4A
- Every dimmed light or group of lights needs to have its own N connected
- Leading edge / trailing edge – can be configured via the app
- Tested with Philips Warmglow and Ikea dimmable LED bulbs
- Energy consumption 1W / Power loss at maximum load 4W
- Operating temperature: -20 – 55 °C
- DIN rail, 6 modules. Width 107 mm, height 59 mm.
- 4x analog outputs 0-10V / 1-10V
- Recommended cable lengths between the module and the controlled device:
- Cat5 cable – max 35 meters
- Cat6 cable – max 50 meters
- Maximum current on one output is 10mA
- Operating temperature -20C to 55C
- Energy consumption 2W
- DIN rail, 2 modules. Width 36mm, height 59mm.
Brosur
- 12 DO / 12 UI Module (pdf)
- 4 Dim Module (pdf)
- 4 AO Module (pdf)
Innovation & Best Quality Product Are Our Priority Services
